TRANSPARENT BALLISTIC PROTECTION BARRIER

Product Description

The transparent ballistic protection barrier consists of a transparent armor (TA) panel mounted in a wheeled frame. Unlike opaque gun shields, this transparent barrier provides a high level of protection without compromising visibility.

The Ideal Transparent Protection

The Ibis Tek Transparent Ballistic Protection Barrier is perfect for indoor security screening stations, and with the interlocking frames, required protection areas can easily be enlarged. Possible applications:

  • Courthouses
  • Federal Buildings
  • Police Stations
  • Schools/Universities
  • Detention Facilities
  • Airports
  • Hospitals

 

Transparent Armor Panel

Transparent armor (also called bullet-resistant glass) is constructed of laminated glass and plastic layers. The no-spall armor design used for this product works in one direction; the “threat side” of the TA panel must face toward potential threats, while the “safe side” must face the area to be protected. Refer to Ibis Tek’s cleaning guide for proper cleaning methods.

Wheeled Frame

The frame is constructed of aluminum with a steel base. Care should be taken when moving the barrier, as the total weight is approximately 310 pounds. The frame can be disassembled to allow insertion of a new TA panel if the supplied panel becomes damaged.

Typical Properties:

  • Protection Barrier : NIJ III
  • Protection Barrier Panel Dimensions : 32″ X 62″
  • Protection Barrier Weight : 241 lbs (16.7 lbs/ft2)
  • Protection Barrier Base Footprint : 33 1/2″ X 24″
Ballistic Properties of Transparent Panel
NIJ III – .308 (7.62x51mm) rifle, FMJ
Transparent armor has been tested with NIJ Standard 0108.01 Level III. It also provides protection against lesser threats such as 5.56mm FMJ, 7.62x39mm FMJ, and most handguns.

Documents & Downloads